Giriş

After too many charging cycles, the battery's capacity will be decreased. This is true for any Lithium-ion battery. Luckily the replacement of the battery in this device is very simple.

Parçalar

Hiçbir parçaya gerek yok.

  1. To open up the casing, you will need to unscrew the four Phillips #0 15mm screws which are accessible from the back.
    • To open up the casing, you will need to unscrew the four Phillips #0 15mm screws which are accessible from the back.

    Yorum Ekle

  2. Gently separate the two halves of the casing.
    • Gently separate the two halves of the casing.

    Yorum Ekle

    • Disconnect the battery from the motherboard by lifting up on the white plastic tab on the top of the connection.

    • Gently pull the cord out by the white plastic adapter. Do not pull from the red and black cord.

    Yorum Ekle

    • Unscrew the Phillips four #0 15mm screws to free the motherboard from the casing.

    Yorum Ekle

    • Slowly pull the motherboard out of the casing. Make sure the loose battery wire doesn't get snagged.

    Yorum Ekle

    • Remove the four #0 15mm screws to release the battery housing from the case.

    Yorum Ekle

    • Take the battery housing and battery out of the casing.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Vladislav Ignatov

Üyelik tarihi: 23-09-2014

369 İtibar

3 adet Kılavuz yazıldı

Takım

USF Tampa, Team 12-5, Blackwell Fall 2014 USF Tampa, Team 12-5, Blackwell Fall 2014 üyesi

USFT-BLACKWELL-F14S12G5

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 410