Giriş

This guide will serve as a prerequisite to the replacement guides for the various electrical components in the Fosera Scandle 200. The removal of the motherboard is necessary before any other components can be accessed. The steps involved are very simple, and very little expertise is required.

Parçalar

Hiçbir parçaya gerek yok.

  1. To open up the casing, you will need to unscrew the four Phillips #0 15mm screws which are accessible from the back.
    • To open up the casing, you will need to unscrew the four Phillips #0 15mm screws which are accessible from the back.

  2. Gently separate the two halves of the casing.
    • Gently separate the two halves of the casing.

  3. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Disconnect the battery from the motherboard by lifting up on the white plastic tab on the top of the connection.
    • Disconnect the battery from the motherboard by lifting up on the white plastic tab on the top of the connection.

    • Gently pull the cord out by the white plastic adapter. Do not pull from the red and black cord.

  5. Unscrew the Phillips four #0 15mm screws to free the motherboard from the casing.
    • Unscrew the Phillips four #0 15mm screws to free the motherboard from the casing.

  6. Slowly pull the motherboard out of the casing. Make sure the loose battery wire doesn't get snagged.
    • Slowly pull the motherboard out of the casing. Make sure the loose battery wire doesn't get snagged.

Bitiş Çizgisi

Vladislav Ignatov

Üyelik tarihi: 23-09-2014

396 İtibar

3 adet Kılavuz yazıldı

Takım

USF Tampa, Team 12-5, Blackwell Fall 2014 USF Tampa, Team 12-5, Blackwell Fall 2014 üyesi

USFT-BLACKWELL-F14S12G5

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 206