Ana içeriğe geç

Fosera Scandle 200 Solar Panel Replacement

Neye ihtiyacın var

  1. Fosera Scandle 200 Solar Panel Replacement, Solar Panel: adım 1, 1 resimden 1.
    • Open the case by pulling the back tab toward you in a downward motion.

  2. Fosera Scandle 200 Solar Panel Replacement: adım 2, 1 resimden 1.
    • Unscrew the two Phillips #2 5mm screws that hold the power cord in place.

  3. Fosera Scandle 200 Solar Panel Replacement: adım 3, 1 resimden 1.
    • Use the flat-end of the spudger to pry off the clamp which holds the cord down.

  4. Fosera Scandle 200 Solar Panel Replacement: adım 4, 1 resimden 1.
    • Use the soldering iron to melt down the solder on each terminal by holding the tip of the iron against the solder until it becomes liquefied.

  5. Fosera Scandle 200 Solar Panel Replacement: adım 5, 1 resimden 1.
    • Gently pull the leads free from the terminals. If they do not easily separate from the terminals, repeat Step 4.

    • Now any solar panel of appropriate Voltage rating can be used to charge the device by soldering the wire leads to the new panel. Try to find a panel with similar specifications to avoid overloading the battery.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Vincent C

Üyelik tarihi: 09/23/14

131 İtibar

1 Kılavuz yazıldı

Ekip

USF Tampa, Team 12-5, Blackwell Fall 2014 USF Tampa, Team 12-5, Blackwell Fall 2014 üyesi

USFT-BLACKWELL-F14S12G5

4 Üyeler

6 adet Kılavuz yazıldı

3 Yorum

In order to use solar energy efficiently, we need to learn how to store solar energy. Unfortunately, we can only store a small fraction of the sun's energy.

niks adonis - Yanıt

More information here.

niks adonis -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 2

Her zaman: 414