Ana içeriğe geç

Fossil Speedway Watch TI-5061 Watchband Link Replacement

Neye ihtiyacın var

  1. Fossil Speedway Watch TI-5061 Watchband Link Replacement, Band Link: adım 1, 1 resimden 1.
    • Locate the link on the band with arrows pointing in opposite directions.

    • Place push pin into the hole on one side of the link.

  2. Fossil Speedway Watch TI-5061 Watchband Link Replacement: adım 2, 1 resimden 1.
    • Hit the push pin with the blunt object (we used scissors) until the small metal rod sticks out from the link.

    • Pull the rod out using your fingers.

    • Repeat on the other side to remove the entire link.

  3. Fossil Speedway Watch TI-5061 Watchband Link Replacement: adım 3, 2 resimden 1. Fossil Speedway Watch TI-5061 Watchband Link Replacement: adım 3, 2 resimden 2.
    • To replace the link, insert the open end of one of the connected links into the open end of the new link.

    • Place the rod into the aligning holes and use the blunt object to hammer the rod into the link.

    • Repeat on the other side of the link to remove it completely.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Zachary Price

Üyelik tarihi: 04/28/15

588 İtibar

3 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 14-10, Amido Spring 2015 Cal Poly, Team 14-10, Amido Spring 2015 üyesi

CPSU-AMIDO-S15S14G10

3 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

Looking for 3 extra watch band links for a fossil big tic model jr8622 18mm width could you tell me please how much this will cost please with delivery as well to croydon in Surrey

Kind regards colin

Colin Evans - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 16

Her zaman: 1,311