Ana içeriğe geç

Parçalar

Hiçbir parça belirtilmedi.

  1. Carefully pop off the cover using a spudger or other opening tool.
    • Carefully pop off the cover using a spudger or other opening tool.

  2. Use a JIS #1 screw driver to remove both 25mm bolts that are attaching the door to the refrigerator.
    • Use a JIS #1 screw driver to remove both 25mm bolts that are attaching the door to the refrigerator.

  3. Remove the damaged hinge. Make sure that you don't lose the bolt that goes into the door. Remove the damaged hinge. Make sure that you don't lose the bolt that goes into the door.
    • Remove the damaged hinge. Make sure that you don't lose the bolt that goes into the door.

  4. Remove the door by slowly lifting straight up, put the door off to the side.
    • Remove the door by slowly lifting straight up, put the door off to the side.

  5. Get a new, non-damaged door.
    • Get a new, non-damaged door.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Peterluchini

Üyelik tarihi: 05-11-2015

508 İtibar

3 adet Kılavuz yazıldı

Takım

UMass Dartmouth, Team 1-2, Bhusal Fall 2015 UMass Dartmouth, Team 1-2, Bhusal Fall 2015 üyesi

UMASSD-BHUSAL-F15S1G2

3 Üyeler

3 adet Kılavuz yazıldı

Bir Yorum

So this is a 4.5 cubic foot mini-refrigerator. I suppose the door was damaged in moving the refrigerator - maybe dropped because it has a weight of 58 pounds.

doctordon - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Past 24 Hours: 3

Past 7 Days: 6

Past 30 Days: 16

Her zaman: 947