Eşyalarını Tamir Et Topluluk Mağaza

FujiFilm FinePix S4500 Flash Springs Replacement

Giriş

The springs in your flash mechanism may break or become worn out. If this happens, follow these steps to replace them.

Neye ihtiyacın var

  1. FujiFilm FinePix S4500 Flash Springs Replacement, LCD: adım 1, 1 resimden 1.

    • Remove the two 3.5 mm Phillips #1 screws in these positions on the left side of the camera with a screwdriver.

    Düzenle

  2. FujiFilm FinePix S4500 Flash Springs Replacement: adım 2, 1 resimden 1.

    • Remove the three 3.5 mm Phillips #1 screws in these locations on the bottom of the camera with a screwdriver.

    Düzenle

  3. FujiFilm FinePix S4500 Flash Springs Replacement: adım 3, 1 resimden 1.

    • Remove the four 3.5 mm Phillips #1 screws in these positions on the right side of the camera with a screwdriver.

    Düzenle

  4. FujiFilm FinePix S4500 Flash Springs Replacement: adım 4, 1 resimden 1.

    • Use a plastic opening tool to separate the back panel from the camera on the left side.

    Düzenle

  6. FujiFilm FinePix S4500 Flash Springs Replacement: adım 5, 1 resimden 1.

    • Use a plastic opening tool to separate the back panel from the camera on the bottom.

    Düzenle

  7. FujiFilm FinePix S4500 Flash Springs Replacement: adım 6, 2 resimden 1. FujiFilm FinePix S4500 Flash Springs Replacement: adım 6, 2 resimden 2.

    • Use a plastic opening tool to separate the back panel from the camera on the left side, then remove the back panel from the camera.

    Düzenle

  8. FujiFilm FinePix S4500 Flash Springs Replacement: adım 7, 1 resimden 1.

    • Use a plastic opening tool to separate the LCD screen from the camera.

    Düzenle

  9. FujiFilm FinePix S4500 Flash Springs Replacement: adım 8, 2 resimden 1. FujiFilm FinePix S4500 Flash Springs Replacement: adım 8, 2 resimden 2.

    • Flip up the black tab holding the LCD ribbon wire in place and remove wire.

    Düzenle

  10. FujiFilm FinePix S4500 Flash Springs Replacement, Flash Springs: adım 9, 3 resimden 1. FujiFilm FinePix S4500 Flash Springs Replacement, Flash Springs: adım 9, 3 resimden 2. FujiFilm FinePix S4500 Flash Springs Replacement, Flash Springs: adım 9, 3 resimden 3.

    • Remove the 3.5 mm Phillips #1 screws holding the top to allow access to the flash mechanism.

    Düzenle

  11. FujiFilm FinePix S4500 Flash Springs Replacement: adım 10, 1 resimden 1.

    • Remove the top and use a screwdriver to remove the highlighted 2.7 mm Phillips #1 screws.

    • Remove the top cover of the flash.

    Düzenle

  12. FujiFilm FinePix S4500 Flash Springs Replacement: adım 11, 1 resimden 1.

    • Remove the pins holding the flash mechanism in place. Tweezers may be required.

    Düzenle

  13. FujiFilm FinePix S4500 Flash Springs Replacement: adım 12, 1 resimden 1.

    • Use a pair of tweezers to remove the flash mechanism springs , then replace with the new springs.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

5 tane daha katılımcı ile

Vicente Rios

Üyelik tarihi: 01/25/17

708 İtibar

6 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Cal Poly, Team 9-4, Banghart Winter 2017 Cal Poly, Team 9-4, Banghart Winter 2017 üyesi

CPSU-BANGHART-W17S9G4

4 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 669