Ana içeriğe geç

Fujifilm Endeavor 100ix Battery Door Replacement

Neye ihtiyacın var

  1. Fujifilm Endeavor 100ix Battery Door Replacement, Battery Door: adım 1, 1 resimden 1.
    • Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.

  2. Fujifilm Endeavor 100ix Battery Door Replacement: adım 2, 1 resimden 1.
    • Locate the battery door.

  3. Fujifilm Endeavor 100ix Battery Door Replacement: adım 3, 1 resimden 1.
    • Locate the latch on the battery door.

    • Use your finger pry to it open where it says "BATT."

  4. Fujifilm Endeavor 100ix Battery Door Replacement: adım 4, 1 resimden 1.
    • Remove the battery from the camera by pulling the battery door outward.

  5. Fujifilm Endeavor 100ix Battery Door Replacement: adım 5, 1 resimden 1.
    • Locate and remove three black 3.80mm screws on the back of the black casing with the Phillips #00 screwdriver.

  6. Fujifilm Endeavor 100ix Battery Door Replacement: adım 6, 1 resimden 1.
    • Squeeze the camera placing a thumb on the tab marked CE.

    • Pull the back half of the camera firmly away from the camera body.

  7. Fujifilm Endeavor 100ix Battery Door Replacement: adım 7, 2 resimden 1. Fujifilm Endeavor 100ix Battery Door Replacement: adım 7, 2 resimden 2.
    • Locate and remove the 3.80mm screw that holds the plastic strip to the camera body with a Phillips #00 screwdriver.

    • The plastic strip will now come off the camera body.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Eric Nicolai

Üyelik tarihi: 01/10/11

679 İtibar

6 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 13-5, Forte Winter 2011 Cal Poly, Team 13-5, Forte Winter 2011 üyesi

CPSU-FORTE-W11S13G5

5 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 4

Her zaman: 1,863