Ana içeriğe geç

Giriş

Outline what you are going to teach someone how to do.

Parçalar

Hiçbir parça belirtilmedi.

  1. Use a PH0 screwdriver to remove four screws on the right side, three screws on the bottom, and four on the left side to take off the rear plate. Use a PH0 screwdriver to remove four screws on the right side, three screws on the bottom, and four on the left side to take off the rear plate. Use a PH0 screwdriver to remove four screws on the right side, three screws on the bottom, and four on the left side to take off the rear plate.
    • Use a PH0 screwdriver to remove four screws on the right side, three screws on the bottom, and four on the left side to take off the rear plate.

  2. Remove the three screws holding the LCD screen in place. Replace with new screen. Replace with new screen.
    • Remove the three screws holding the LCD screen in place.

    • Replace with new screen.

  3. Remove the two screws from underneath the flash mechanism. Remove the two screws placed on the right and left sides of the camera. Remove the two screws placed on the right and left sides of the camera.
    • Remove the two screws from underneath the flash mechanism.

    • Remove the two screws placed on the right and left sides of the camera.

  4. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  5. Use the opening tool to pry the top plate off of the top of the camera.
    • Use the opening tool to pry the top plate off of the top of the camera.

  6. Remove the four larger silver plated screws placed on the inside of the lens. Remove the lens by lifting it up from the cavity.
    • Remove the four larger silver plated screws placed on the inside of the lens.

    • Remove the lens by lifting it up from the cavity.

  7. Remove the five bracket screws. Remove the five bracket screws. Remove the five bracket screws.
    • Remove the five bracket screws.

  8. Once the screws are out, remove the the bracket Remove speaker with given tweezer tool and replace
    • Once the screws are out, remove the the bracket

    • Remove speaker with given tweezer tool and replace

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

diane heidke

Üyelik tarihi: 24-03-2015

24 İtibar

1 Kılavuz yazıldı

Takım

UMass Dartmouth, Team 4-2, Vijaybhaskar Spring 2015 UMass Dartmouth, Team 4-2, Vijaybhaskar Spring 2015 üyesi

UMASSD-VIJAYBHASKAR-S15S4G2

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 7

Her zaman: 610