Eşyalarını Tamir Et Topluluk Mağaza

Fujifilm FinePix S8630 Flash Lid Spring Replacement

Neye ihtiyacın var

  1. Fujifilm FinePix S8630 Flash Lid Spring Replacement, Battery Door: adım 1, 1 resimden 1.

    • Remove the M3 x 4mm screws from the bottom of your device as indicated by the picture. using the Philips Head J0 Screw Driver Bit .

    Düzenle

  2. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 2, 1 resimden 1.

    • Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the left side of the device as indicated by the pictures.

    Düzenle

  3. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 3, 1 resimden 1.

    • Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the right side of the device as indicated by the pictures.

    Düzenle

  5. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 4, 2 resimden 1. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 4, 2 resimden 2.

    • Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the camera flash lid as indicated by the picture.

    • Remove the plastic cover from the flash lid by gentle pulling them apart or using the plastic opening tool.

    Düzenle

  6. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 5, 1 resimden 1.

    • Fold the lid down in order to access and remove the final M3 x 4mm screw using your Philips Head Screwdriver.

    Düzenle

  7. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 6, 3 resimden 1. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 6, 3 resimden 2. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 6, 3 resimden 3.

    • Use the plastic opening tool to pry the back and front casings of the camera apart.

    • Once pried apart use your hands to pull off the back plate of the camera.

    • You will need to apply a little bit of force to remove the back plate.

    Düzenle

  8. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 7, 3 resimden 1. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 7, 3 resimden 2. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 7, 3 resimden 3.

    • Once the back plate is removed twist the battery cover clockwise and it should easily dislodge.

    Düzenle

  9. Fujifilm FinePix S8630 Flash Lid Spring Replacement, Flash Lid Spring: adım 8, 2 resimden 1. Fujifilm FinePix S8630 Flash Lid Spring Replacement, Flash Lid Spring: adım 8, 2 resimden 2.

    • Firmly grasp the flash bulb lid and remove the lid from the camera.

    Düzenle

  10. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 9, 3 resimden 1. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 9, 3 resimden 2. Fujifilm FinePix S8630 Flash Lid Spring Replacement: adım 9, 3 resimden 3.

    • Locate the spring and grasp with the tweezers.

    • Pinch and compress the spring to remove it from the camera housing.

    • Slide the lever that was holding the spring out of the camera housing.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

5 tane daha katılımcı ile

Colton Lancsarics

Üyelik tarihi: 02/10/16

731 İtibar

6 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

Ekip

USF Tampa, Team 3-2, Sullivan Spring 2016 USF Tampa, Team 3-2, Sullivan Spring 2016 üyesi

USFT-SULLIVAN-S16S3G2

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 5

Her zaman: 306