Ana içeriğe geç

Giriş

The LCD screen is required to operate your camera. If yours is not working, it needs to be replaced. This guide will show you how to do that.

Parçalar

Hiçbir parça belirtilmedi.

  1. Unscrew the six 3.5mm Philips head from the outer casing. Unscrew the six 3.5mm Philips head from the outer casing. Unscrew the six 3.5mm Philips head from the outer casing.
    • Unscrew the six 3.5mm Philips head from the outer casing.

  2. Open the battery chamber and remove the battery. Pry the front half of the casing from the camera. Be careful that the sensor cover—the small piece of translucent plastic—doesn't fall out of place. Return it to its original location if it does.
    • Open the battery chamber and remove the battery.

    • Pry the front half of the casing from the camera.

    • Be careful that the sensor cover—the small piece of translucent plastic—doesn't fall out of place. Return it to its original location if it does.

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Pry the back half of the casing from the camera. Be careful when maneuvering the camera without the casing on as the LCD screen is not fastened to anything.
    • Pry the back half of the casing from the camera.

    • Be careful when maneuvering the camera without the casing on as the LCD screen is not fastened to anything.

  5. Lift the LCD screen out of the camera. There is a tab that keeps in place the ribbon that attaches the screen and motherboard. Lift this up using the spudger and disconnect the screen from the motherboard. There is a tab that keeps in place the ribbon that attaches the screen and motherboard. Lift this up using the spudger and disconnect the screen from the motherboard.
    • Lift the LCD screen out of the camera.

    • There is a tab that keeps in place the ribbon that attaches the screen and motherboard. Lift this up using the spudger and disconnect the screen from the motherboard.

Sonuç

To reassemble your device, follow these instructions in reverse order.

George Lindner

Üyelik tarihi: 20-01-2015

237 İtibar

2 adet Kılavuz yazıldı

Takım

USF Tampa, Team 19-3, Blackwell Winter 2015 USF Tampa, Team 19-3, Blackwell Winter 2015 üyesi

USFT-BLACKWELL-W15S19G3

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 2

Her zaman: 388