Giriş

Accessing the RAM in this computer is straightforward and requires minimal disassembly.

Parçalar

Hiçbir parçaya gerek yok.

Locate the two clips on the bottom of the computer that support the battery.
  • Locate the two clips on the bottom of the computer that support the battery.

Yorum Ekle

Using your fingers,  push the clips inward and then upward.
  • Using your fingers, push the clips inward and then upward.

  • Lift the battery out of the computer.

Yorum Ekle

  • Locate the RAM cover.

Yorum Ekle

  • Remove the screw labeled “3.”

  • The screw is not shown in the picture.

Yorum Ekle

  • Remove the RAM cover by lifting it with your finger.

Yorum Ekle

  • Remove the RAM module by pushing the securing clips outward.

  • The RAM module will then slightly pop out.

  • When you are installing a new RAM module, carefully insert it into the socket and push downwards.

Yorum Ekle

  • Carefully pull the RAM module from the computer.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Neil Daniels

Üyelik tarihi: 17-01-2011

1.276 İtibar

11 adet Kılavuz yazıldı

Takım

Cal Poly, Team 5-18, Amido Winter 2011 Cal Poly, Team 5-18, Amido Winter 2011 üyesi

CPSU-AMIDO-W11S5G18

3 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 7

Her zaman: 2,755