Ana içeriğe geç

Fujitsu Lifebook Stylistic Q584 Inner Back Shield Replacement

Neye ihtiyacın var

  1. Fujitsu Lifebook Stylistic Q584 Inner Back Shield Replacement, Back Case: adım 1, 1 resimden 1.
    • Remove the white sticker covering the screws (if applicable).

    • Use the PH1 screwdriver to remove the four 2 mm screws from the the backside of the device.

  2. Fujitsu Lifebook Stylistic Q584 Inner Back Shield Replacement: adım 2, 1 resimden 1.
    • Insert the plastic opening tool along the seam of the back case.

    • Gently slide the plastic opening tool along the entire seam popping the clips free.

  3. Fujitsu Lifebook Stylistic Q584 Inner Back Shield Replacement: adım 3, 1 resimden 1.
    • Carefully lift the back case and remove the smartcard ribbon from the motherboard.

  4. Fujitsu Lifebook Stylistic Q584 Inner Back Shield Replacement, Inner Back Shield: adım 4, 1 resimden 1.
    • Remove the ten 3mm screws with a PH00 screwdriver from the shield.

  5. Fujitsu Lifebook Stylistic Q584 Inner Back Shield Replacement: adım 5, 1 resimden 1.
    • Remove the grey docking station port cover.

  6. Fujitsu Lifebook Stylistic Q584 Inner Back Shield Replacement: adım 6, 1 resimden 1.
    • Gently slide the plastic opening tool along the entire seam popping the clips free.

  7. Fujitsu Lifebook Stylistic Q584 Inner Back Shield Replacement: adım 7, 1 resimden 1.
    • Lift the shield away from the device and remove the fingerprint scanner's ribbon from the motherboard.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Spencer Bacon

Üyelik tarihi: 09/21/17

410 İtibar

4 adet Kılavuz yazıldı

Ekip

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 465