Eşyalarını Tamir Et Topluluk Mağaza

Fujitsu Lifebook Stylistic Q584 USB port Replacement

Giriş

We will walk through removal the USB port from the Fujitsu Lifebook Stylistic Q584.

Neye ihtiyacın var

  1. Fujitsu Lifebook Stylistic Q584 USB port Replacement, Back Case: adım 1, 1 resimden 1.

    • Remove the white sticker covering the screws (if applicable).

    • Use the PH1 screwdriver to remove the four 2 mm screws from the the backside of the device.

    Düzenle

  2. Fujitsu Lifebook Stylistic Q584 USB port Replacement: adım 2, 1 resimden 1.

    • Insert the plastic opening tool along the seam of the back case.

    • Gently slide the plastic opening tool along the entire seam popping the clips free.

    Düzenle

  3. Fujitsu Lifebook Stylistic Q584 USB port Replacement: adım 3, 1 resimden 1.

    • Carefully lift the back case and remove the smartcard ribbon from the motherboard.

    Düzenle

  4. Fujitsu Lifebook Stylistic Q584 USB port Replacement, Inner Back Shield: adım 4, 1 resimden 1.

    • Remove the ten 3mm screws with a PH00 screwdriver from the shield.

    Düzenle

  6. Fujitsu Lifebook Stylistic Q584 USB port Replacement: adım 5, 1 resimden 1.

    • Remove the grey docking station port cover.

    Düzenle

  7. Fujitsu Lifebook Stylistic Q584 USB port Replacement: adım 6, 1 resimden 1.

    • Gently slide the plastic opening tool along the entire seam popping the clips free.

    Düzenle

  8. Fujitsu Lifebook Stylistic Q584 USB port Replacement: adım 7, 1 resimden 1.

    • Lift the shield away from the device and remove the fingerprint scanner's ribbon from the motherboard.

    Düzenle

  9. Fujitsu Lifebook Stylistic Q584 USB port Replacement, USB port: adım 8, 1 resimden 1.

    • Remove 2mm screw with a PH1 screwdriver from USB board

    Düzenle

  10. Fujitsu Lifebook Stylistic Q584 USB port Replacement: adım 9, 1 resimden 1.

    • Disconnect USB periphery ribbon from motherboard

    Düzenle

  11. Fujitsu Lifebook Stylistic Q584 USB port Replacement: adım 10, 1 resimden 1.

    • Pull USB board up to remove.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Spencer Bacon

Üyelik tarihi: 09/21/17

410 İtibar

4 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

Washington State, Team S1-G3, Phelps-Hillen Fall 2017 Washington State, Team S1-G3, Phelps-Hillen Fall 2017 üyesi

WSU-PHELPS-HILLEN-F17S1G3

5 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 6

Her zaman: 473