Release the 3 clips that attach the front fan guard to the rear fan guard. Notice: The lower connecting bracket is NOT a clip. It acts as a mounting alignment bracket for the front fan guard.
  • Release the 3 clips that attach the front fan guard to the rear fan guard.

  • Notice: The lower connecting bracket is NOT a clip. It acts as a mounting alignment bracket for the front fan guard.

Yorum Ekle

Pull the front fan guard off.
  • Pull the front fan guard off.

Yorum Ekle

Remove the spinner from the center of the fan blade. Remove the spinner from the center of the fan blade.
  • Remove the spinner from the center of the fan blade.

Yorum Ekle

The fan blades should now be easy to lift up.
  • The fan blades should now be easy to lift up.

  • When reassembling the fan make sure the notches in the center of the fan blade line up with the protrusions in the motor's shaft.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 başka kişi bu kılavuzu tamamladı.

Alan Su

Üyelik tarihi: 03-10-2012

513 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 24-28, Regan Fall 2012 Cal Poly, Team 24-28, Regan Fall 2012 üyesi

CPSU-REGAN-F12S24G28

4 Üyeler

10 adet Kılavuz yazıldı

Bir Yorum

Where do you buy the fan blades?

charlie - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 6

Son 7 Gün: 24

Son 30 Gün: 113

Her zaman: 1,943