Eşyalarını Tamir Et Topluluk Mağaza

Game Boy Advance Back Panel Replacement

Yazan: Aldo Corona (ve 8 başka katılımcı)
  • Yorumlar: 1
  • Favoriler: 5
  • Tamamlanma: 2

Zorluk

Kolay

Adımlar

4

Gerekli Süre

1 - 2 dakika

Bölümler

2

İşaretler

0

Giriş

How to remove the back panel from a Game Boy Advance.

Aletler

Parçalar

Hiçbir parça belirtilmedi.

Videoya Genel Bakış

  1. Take the battery cover off by releasing the locking tab and hinging the cover away. Take the battery cover off by releasing the locking tab and hinging the cover away. Take the battery cover off by releasing the locking tab and hinging the cover away.

    • Take the battery cover off by releasing the locking tab and hinging the cover away.

    Düzenle

  2. Remove the six back panel screws using a Tri-wing Screwdriver.

    • Remove the six back panel screws using a Tri-wing Screwdriver.

    Düzenle

  4. Remove bottom back panel screw with a Phillips #1 screw driver.

    • Remove bottom back panel screw with a Phillips #1 screw driver.

    Düzenle

  5. Remove the back panel by pulling away with one hand and the front secured in the other hand.

    • Remove the back panel by pulling away with one hand and the front secured in the other hand.

    • Removal of the back panel may cause shoulder buttons and side panels to come loose and fall off.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

8 tane daha katılımcı ile

Aldo Corona

Üyelik tarihi: 25-01-2010

706 İtibar

6 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

Takım

Cal Poly, Team 16-29, Maness Winter 2010 Cal Poly, Team 16-29, Maness Winter 2010 üyesi

CPSU-MANESS-W10S16G29

5 Üyeler

51 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 21

Son 30 gün: 89

Her zaman: 8,021