Ana içeriğe geç

Giriş

Use this guide to remove the battery cover and battery from the Game Boy.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad. Once the screw has been loosened, lift the cover off the back of the device. Once the screw has been loosened, lift the cover off the back of the device.
    • Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad.

    • Once the screw has been loosened, lift the cover off the back of the device.

  2. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  3. Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector. Gently grab the wires. Gently grab the wires.
    • Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector.

    • Gently grab the wires.

  4. Carefully pull the wires until the connector comes out of the device. Be careful! Don't pull too hard, or you may rip the wires out from the connector.
    • Carefully pull the wires until the connector comes out of the device.

    • Be careful! Don't pull too hard, or you may rip the wires out from the connector.

    • When putting the battery back into the device, make sure the connector is put in exactly the way it came out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Jack

Üyelik tarihi: 21-01-2010

264 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 8-46, Regan Winter 2010 Cal Poly, Team 8-46, Regan Winter 2010 üyesi

CPSU-REGAN-W10S8G46

5 Üyeler

15 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 12

Son 30 Gün: 48

Her zaman: 11,765