GameSir G7 SE Button Gaskets Replacement

Giriş

For GameSir G7 SE controllers experiencing unresponsive or sticky buttons, this guide provides steps for cleaning or replacing the conductive rubber button gaskets. The proper function of these contacts is crucial for accurate game input. Before attempting this repair, ensure the controller is disconnected from power to prevent electrical hazards.

Cleaning the contacts with isopropyl alcohol or replacing them can restore button responsiveness and is detailed in the “Button Activating Without Being Pressed” section of our troubleshooting page.

Neye ihtiyacın var

Adım 1 Interior face plate

GameSir G7 SE Button Gaskets Replacement, Interior face plate: adım 1, 1 resimden 1.

Remove the faceplate by prying upwards with a plastic opening tool.
This faceplate is magnetic and will be easy to come off.

Düzenle

Adım 2

Use a T6 Torx Screwdriver to remove the six 9 mm screws from the interior face plate.

Düzenle

Adım 3

Using a plastic spudger tool, remove the interior face plate. Go around all the edges, prying downwards until it's removed.
Make sure to hold the controller upside down; otherwise the buttons will fall out.

Düzenle