Eşyalarını Tamir Et Topluluk Mağaza

Gamesir-G3s Joystick Replacement

Giriş

This guide demonstrates how to replace a broken joystick on the GameSir-G3s controller.

This guide can also be used to modify the controller with a different type of joystick or to fix drift.

Before we start this guide, please turn off the controller and have a container set aside for the battery.

Neye ihtiyacın var

  1. Gamesir-G3s Joystick Replacement, Joystick: adım 1, 3 resimden 1. Gamesir-G3s Joystick Replacement, Joystick: adım 1, 3 resimden 2. Gamesir-G3s Joystick Replacement, Joystick: adım 1, 3 resimden 3.

    • Use a Phillips #00 screwdriver to remove the seven screws securing the back case.

    • Gently pry the rear half of the shell off by hand.

    Düzenle

  2. Gamesir-G3s Joystick Replacement: adım 2, 3 resimden 1. Gamesir-G3s Joystick Replacement: adım 2, 3 resimden 2. Gamesir-G3s Joystick Replacement: adım 2, 3 resimden 3.

    • Battery can be a hazard if punctured.

    • Use tweezers to slowly pull on the connector while wiggling until it releases from its port.

    Düzenle

  3. Gamesir-G3s Joystick Replacement: adım 3, 3 resimden 1. Gamesir-G3s Joystick Replacement: adım 3, 3 resimden 2. Gamesir-G3s Joystick Replacement: adım 3, 3 resimden 3.

    • The 600mAh rechargeable battery must be stored safely while you continue with repair.

    • Peel the battery off of the motherboard.

    • Store the battery in a container at room temperature.

    Düzenle

  5. Gamesir-G3s Joystick Replacement: adım 4, 2 resimden 1. Gamesir-G3s Joystick Replacement: adım 4, 2 resimden 2.

    • Use a Phillips #00 screwdriver to remove the two screws that connect the motherboard to the case.

    Düzenle

  6. Gamesir-G3s Joystick Replacement: adım 5, 3 resimden 1. Gamesir-G3s Joystick Replacement: adım 5, 3 resimden 2. Gamesir-G3s Joystick Replacement: adım 5, 3 resimden 3.

    • Remove the bracket that holds the bumpers in place by gently levering it out of its two holders on both sides.

    Düzenle

  7. Gamesir-G3s Joystick Replacement: adım 6, 3 resimden 1. Gamesir-G3s Joystick Replacement: adım 6, 3 resimden 2. Gamesir-G3s Joystick Replacement: adım 6, 3 resimden 3.

    • Use a Philips #00 screwdriver to remove 6 screws holding the button panel to the controller.

    • Remove the button panel from the front case.

    Düzenle

  8. Gamesir-G3s Joystick Replacement: adım 7, 3 resimden 1. Gamesir-G3s Joystick Replacement: adım 7, 3 resimden 2. Gamesir-G3s Joystick Replacement: adım 7, 3 resimden 3.

    • Grab the joystick from the base and then gently pull it up and off.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Alex

Üyelik tarihi: 07/06/22

145 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

York University, Team M-15, Allen Summer 2022 York University, Team M-15, Allen Summer 2022 üyesi

YORK-ALLEN-SU22SMG15

1 Üye

1 Kılavuz yazıldı

Bir Yorum

пиздец блять. и какую проблему решают эти действия?

RTM-ONE RHU - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 30

Her zaman: 894