Eşyalarını Tamir Et Topluluk Mağaza

Garmin Approach S2 Motherboard Replacement

Giriş

Be very careful when handling connector wires, as they are incredibly easily broken. This guide is unique only in removing the circuit board from the screen.

Neye ihtiyacın var

  1. Garmin Approach S2 Motherboard Replacement, Back Cover: adım 1, 2 resimden 1. Garmin Approach S2 Motherboard Replacement, Back Cover: adım 1, 2 resimden 2.

    • Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.

    Düzenle

  2. Garmin Approach S2 Motherboard Replacement: adım 2, 1 resimden 1.

    • Remove the back cover carefully.

    • Even after the screws have been removed, the back cover can still be quite difficult to take off. Moderate to extensive prying may be required. Be gentle, but firm.

    Düzenle

  3. Dikkatli ol: adım 3 yapım altında olarak işaretlenen bir kılavuzdan alınmıştır.

    Garmin Approach S2 Motherboard Replacement, Water Proof Gasket: adım 3, 1 resimden 1.

    • Remove the orange gasket.

    Düzenle

  4. Garmin Approach S2 Motherboard Replacement, Screen: adım 4, 1 resimden 1.

    • Remove the screen and motherboard assembly from the case.

    Düzenle

  6. Garmin Approach S2 Motherboard Replacement: adım 5, 1 resimden 1.

    • Use a metal spudger to remove the golden retaining clip from the screen. There will be some adhesive to break.

    Düzenle

  7. Garmin Approach S2 Motherboard Replacement: adım 6, 1 resimden 1.

    • Remove the screen from the golden metal clip.

    Düzenle

  8. Garmin Approach S2 Motherboard Replacement: adım 7, 1 resimden 1.

    • Unhinge the black retaining hinge by prying it open with the metal spudger; Your fingernails will work as well.

    Düzenle

  9. Garmin Approach S2 Motherboard Replacement: adım 8, 2 resimden 1. Garmin Approach S2 Motherboard Replacement: adım 8, 2 resimden 2.

    • Remove the connector from the motherboard by pulling it free at the base.

    • Make sure to pull from the base of the connector wire, as it is very easy to rip the wire from the screen.

    Düzenle

  10. Garmin Approach S2 Motherboard Replacement: adım 9, 1 resimden 1.

    • Remove the screen from the motherboard.

    • Notice our tape retaining the connector to the screen. This is so easy to rip!

    Düzenle

  11. Garmin Approach S2 Motherboard Replacement, Motherboard: adım 10, 1 resimden 1.

    • Remove the motherboard from the screen.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Evan Miller

Üyelik tarihi: 03/21/18

250 İtibar

2 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

IUPUI, Team S4-G1, Baechle Spring 2018 IUPUI, Team S4-G1, Baechle Spring 2018 üyesi

IUPUI-BAECHLE-S18S4G1

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 14

Her zaman: 676