Eşyalarını Tamir Et Topluluk Mağaza

Garmin Dezl 770LMT Motherboard Replacement

Neye ihtiyacın var

  1. Garmin Dezl 770LMT Motherboard Replacement, Back Panel Removal: adım 1, 2 resimden 1. Garmin Dezl 770LMT Motherboard Replacement, Back Panel Removal: adım 1, 2 resimden 2.

    • Turn the device screen down and using the screwdriver remove all eight screws from the back plate.

    Düzenle

  2. Garmin Dezl 770LMT Motherboard Replacement: adım 2, 1 resimden 1.

    • Place a nylon spudger in the seam between the front and back panel and carefully lift around the edge of the device.

    Düzenle

  4. Garmin Dezl 770LMT Motherboard Replacement: adım 3, 1 resimden 1.

    • Use the spudger to pry apart the screen from all around the device.

    • Gently lift the screen so not to disconnect the ribbon attaching the screen to the motherboard.

    Düzenle

  5. Garmin Dezl 770LMT Motherboard Replacement, Motherboard: adım 4, 2 resimden 1. Garmin Dezl 770LMT Motherboard Replacement, Motherboard: adım 4, 2 resimden 2.
    Bu adımda kullanılan alet:
    Anti-Static Wrist Strap
    $7.95
    Satın Al

    • After you've removed the back cover, you will see a copper colored ribbon connected to a grey hinge.

    • Carefully remove the hinge from the cord using a spudger and the ribbon will come out.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

    • Make sure to wear an anti-static wrist strap when handling the motherboard.

    Düzenle

  6. Garmin Dezl 770LMT Motherboard Replacement: adım 5, 2 resimden 1. Garmin Dezl 770LMT Motherboard Replacement: adım 5, 2 resimden 2.

    • Using a T5 Torx screwdriver remove the eight screws attaching the motherboard to the case

    Düzenle

  7. Garmin Dezl 770LMT Motherboard Replacement: adım 6, 2 resimden 1. Garmin Dezl 770LMT Motherboard Replacement: adım 6, 2 resimden 2.

    • Carefully remove the cord connecting the battery to the motherboard, by gently lifting it straight up from the board.

    • Do not pull the cord out towards the battery. The solder joints holding the port onto the mother board may break.

    • If you want to remove the antenna and speaker you will need to desolder them from the mother board. This is not necessary to remove the mother board.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Francisco Rosado

Üyelik tarihi: 10/05/16

370 İtibar

4 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

USF Tampa, Team 1-3, Lacy Fall 2016 USF Tampa, Team 1-3, Lacy Fall 2016 üyesi

USFT-LACY-F16S1G3

4 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

Onde posso comprar a Motherbord?

Carlix - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 23

Her zaman: 1,123