Eşyalarını Tamir Et Topluluk Mağaza

Garmin Fenix 3 HR "self made charging"

Giriş

cut off the mini-USB, or micro-USB, or Thunderbolt and remove the isolation of the red and the black wires.

the red wire will go on the top of the 4 contacts.

the black will go on the bottom last of the 4 contacts.

be creative and fasten them to the fenix 3. I used a clip and insulted it with a piece of plastic. you can also use duck take or similar to stick the 2 wires to the corresponding contacts on the fenix.

plug in the USB to a USB port or USB charging plug.

on the display you should now see the charging %

Neye ihtiyacın var

  1. Garmin Fenix 3 HR "self made charging", Garmin Fenix 3 HR "self made charging": adım 1, 2 resimden 1. Garmin Fenix 3 HR "self made charging", Garmin Fenix 3 HR "self made charging": adım 1, 2 resimden 2.

    • Insert wisdom here.

    Düzenle

  3. Garmin Fenix 3 HR "self made charging": adım 2, 1 resimden 1.

    • Insert wisdom here.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

11 farklı kişi bu kılavuzu tamamladı.

8 Yorum

great job, very easy to do it. The hard part is that the wiring is too small :)

thank you

Pedro R. - Yanıt

Thank you, David704. Your guide save me 13.50$ and a 3 day wait.

asads zia - Yanıt

Thank you.. forgot charger at work before vacation.. thank youuuu :)

jakadels - Yanıt

Thank you! You just saved my step streak :)

Magnus Berg - Yanıt

quiero que me cheque un garmin istinct que no recibe carga

Victor Manuel Perez Rodriguez - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 23

Son 30 gün: 88

Her zaman: 12,129