Ana içeriğe geç

Giriş

This guide will give you step-by-step instructions on how to quickly swap out that old battery for a new one.

  1. Remove the five 7mm screws with H1.3 hex screwdriver. Remove the five 7mm screws with H1.3 hex screwdriver.
    • Remove the five 7mm screws with H1.3 hex screwdriver.

  2. Use a plastic opening tool to remove the face of the device to expose the inner components. There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well. Be careful with the ribbon that connects the motherboard to the display.
    • Use a plastic opening tool to remove the face of the device to expose the inner components.

    • There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well.

    • Be careful with the ribbon that connects the motherboard to the display.

  3. Proceed to disconnect the ribbon from the motherboard using tweezers.
    • Proceed to disconnect the ribbon from the motherboard using tweezers.

  4. Using a T5 screwdriver, remove the two 5mm screws. The motherboard should now move freely.
    • Using a T5 screwdriver, remove the two 5mm screws.

    • The motherboard should now move freely.

  5. Another ribbon is attached to the top of the motherboard. Disconnect this ribbon.
    • Another ribbon is attached to the top of the motherboard. Disconnect this ribbon.

  6. Disconnect wires connecting battery to motherboard.
    • Disconnect wires connecting battery to motherboard.

  7. The battery is glued to the motherboard and will need pried off using the nylon spudger.
    • The battery is glued to the motherboard and will need pried off using the nylon spudger.

  8. Now attach the new battery with adhesive and reassemble.
    • Now attach the new battery with adhesive and reassemble.

Sonuç

To reassemble your device, follow these instructions in reverse order.

12 farklı kişi bu kılavuzu tamamladı.

Victor Tanguy

Üyelik tarihi: 26-03-2018

540 İtibar

1 Kılavuz yazıldı

Takım

IUPUI, Team S1-G6, Harley Spring 2018 IUPUI, Team S1-G6, Harley Spring 2018 üyesi

IUPUI-HARLEY-S18S1G6

3 Üyeler

2 adet Kılavuz yazıldı

9 Yorum

Does anybody do It in a fenix 5?

Fernando Alcaraz - Yanıt

Thank you. It saved me around over £100 to change the battery myself. Garmin quoted around £121 for battery replacement for out of warranty watch. I bought the battery around £15 and followed the guide to change the battery myself in my Fenix 3 watch. My watch does not have heart rate monitor, perhaps the ribon at step 5 is for HR monitor as I didn’t have it in my watch. Thanks again for simple, detailed and easy to follow instructions.

Asif Shafiq - Yanıt

Where did you get the battery?

Alex -

Howdy,

Followed all your steps but now the new battery will not charge. Could I have missed something in replacing the battery somehow? Pins not making contact or so?

Adrian - Yanıt

I’ve just followed these steps, and with £4.50 for a precision torx set, and £14.50 for a battery that came the next day by UPS, it’s saved me loads. The couple of things I would add are - you can use double sided tape to attached the new battery, and buy a battery with the connector already attached unless you are an electrician it saves the fuss, and make sure the connector is fully in place, it’s easy for it to be marginally out and you’ll get no power.

thanks!

Jason Clarke - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 47

Son 7 Gün: 270

Son 30 Gün: 1,008

Her zaman: 10,022