Ana içeriğe geç

Giriş

The screen is a vital component to a digital smart watch. With the right tools, replacing the screen can be done efficiently and effectively.

  1. Power off your watch before disassembling it.
    • Power off your watch before disassembling it.

    • Place the watch on a hard surface with the screen facing down.

    • Unscrew the four 7.0 mm screws located at each corner using a T5 screwdriver.

  2. Pry the old battery out using a plastic spudger.
    • Pry the old battery out using a plastic spudger.

  3. Unscrew the two T4 6 mm screws located on both sides of the motherboard.
    • Unscrew the two T4 6 mm screws located on both sides of the motherboard.

  4. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  5. Lift the motherboard up using a plastic spudger.
    • Lift the motherboard up using a plastic spudger.

    • Ribbon cables are still attached underneath—be careful when prying the motherboard up.

  6. Flip the ZIF connectors using a plastic spudger tool.
    • Flip the ZIF connectors using a plastic spudger tool.

    • Remove the motherboard.

  7. Remove gold piece in the corner using the pointed side of the 4 spudger.
    • Remove gold piece in the corner using the pointed side of the 4 spudger.

    • Any spudger with a pointed end should work to remove this piece.

  8. Pry the screen up with a plastic opening tool.
    • Pry the screen up with a plastic opening tool.

    • Any plastic tool with a flat edge should work to remove the screen.

    • Remove the screen.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Suzanne Drumm

Üyelik tarihi: 21-03-2018

85 İtibar

1 Kılavuz yazıldı

Takım

IUPUI, Team S5-G3, Baechle Spring 2018 IUPUI, Team S5-G3, Baechle Spring 2018 üyesi

IUPUI-BAECHLE-S18S5G3

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 6

Son 30 Gün: 23

Her zaman: 308