Giriş

Replacing the speaker in a Garmin Nuvi 200.

  1. Peel off the sticker from the bottom of the device to reveal two screws.
    • Peel off the sticker from the bottom of the device to reveal two screws.

    Yorum Ekle

  2. Remove two T5 Torx screws.
    • Remove two T5 Torx screws.

    Yorum Ekle

    • Insert a plastic opening tool in the gap between the front and rear casing.

    • Carefully work the tool around the gap, separating the two halves of the case.

      • Keep the power switch in place while removing the rear case.

    Yorum Ekle

    • Unscrew the two screws on opposite sides of the speaker using the #00 Phillips screwdriver.

    there is no use showing how to replace a speaker in nuvi if we cant find any

    seems like a god dam mistery

    Jean Michel Tche - Yanıt

    • Pull the cable out to detach the speaker from the logic board.

    Yorum Ekle

    • Wedge the iPod opener into the space between the speaker and the case.

    • Apply pressure to pry the speaker away from the case.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 başka kişi bu kılavuzu tamamladı.

Anjelica

Üyelik tarihi: 11-04-2010

504 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 25-90, Amido Spring 2010 Cal Poly, Team 25-90, Amido Spring 2010 üyesi

CPSU-AMIDO-S10S25G90

4 Üyeler

9 adet Kılavuz yazıldı

2 Yorum

just a note i had a problem with the speaker in my nuvi 200 an upon opening up found speaker plug had come loose i guess from being dropped a few times pushed plug in an works fine please check all connections before replacing your speaker saved me $$ thanks for a great site everyone...

randaleholland - Yanıt

Where can you buy replacement speakers for the Garmin units?

Brat Fry - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 11

Her zaman: 6,465