Giriş

If your power button is defective, replace the old one with the new power button.

  1. Remove the barcode sticker at the bottom of the device.
    • Remove the barcode sticker at the bottom of the device.

    Yorum Ekle

  2. Remove two 8.4 mm T5 screws from the bottom of the device.
    • Remove two 8.4 mm T5 screws from the bottom of the device.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using a plastic opening tool, carefully pry open the device.

    • Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.

    turn the unit around

    Andrew Hayden - Yanıt

    Since there is no replacement speaker whats the point of this process?

    greg - Yanıt

    Very detailed set of instructions! Does anyone known the thread size of the screws in step 2? 8.4 mm T5 screws: is the length of the screw (8.4 mm) ,and the head specification (T5- size of screw driver). I need the actual thread specification. I lost one of the screws and the other one 's head is stripped. I need to replace both screws.

    Harold Schultz - Yanıt

    • Remove the power button.

    Where can I buy the button

    milosvalek - Yanıt

Sonuç

To reassemble your device, follow these instructions in reverse order.

Timothy

Üyelik tarihi: 26-01-2012

41 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 9-3, Regan Winter 2012 Cal Poly, Team 9-3, Regan Winter 2012 üyesi

CPSU-REGAN-W12S9G3

5 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 16

Her zaman: 9,165