Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

Before replacing the speaker, visit this device's Troubleshooting Page to determine whether you need to replace the speaker. Follow the steps in this guide if you need to replace the speaker.

  1. Remove the four screws on the back of the GPS using the T5 Torx screwdriver. Remove the four screws on the back of the GPS using the T5 Torx screwdriver. Remove the four screws on the back of the GPS using the T5 Torx screwdriver.
    • Remove the four screws on the back of the GPS using the T5 Torx screwdriver.

  2. Pry the GPS open using a plastic opening tool. When prying open the device, use caution to avoid damaging the motherboard. When prying open the device, use caution to avoid damaging the motherboard.
    • Pry the GPS open using a plastic opening tool.

    • When prying open the device, use caution to avoid damaging the motherboard.

  3. Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al

    Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al
  4. Use the plastic opening tool to pry the speaker away from the device. Be gentle, the speakers are connected to the motherboard by blue and black wire.
    • Use the plastic opening tool to pry the speaker away from the device.

    • Be gentle, the speakers are connected to the motherboard by blue and black wire.

  5. Using a soldering iron, desolder the black and blue wires connected to the speaker.
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 133