Eşyalarını Tamir Et Topluluk Mağaza

Garmin Nuvi 50LM Speaker Replacement

Giriş

This guide instructs how to replace a faulty speaker.

Neye ihtiyacın var

  1. Garmin Nuvi 50LM Speaker Replacement, Speaker Replacement: adım 1, 1 resimden 1.

    • Place the LCD screen is face down on a flat surface.

    • Make sure the side containing the speaker and the charging port is facing up.

    Düzenle

  2. Garmin Nuvi 50LM Speaker Replacement: adım 2, 3 resimden 1. Garmin Nuvi 50LM Speaker Replacement: adım 2, 3 resimden 2. Garmin Nuvi 50LM Speaker Replacement: adım 2, 3 resimden 3.

    • Remove the four 9 mm screws on the back of the GPS unit using the Torx T-4 screwdriver found in the iFixit Pro Tech Tool Kit.

    Düzenle

  4. Garmin Nuvi 50LM Speaker Replacement: adım 3, 3 resimden 1. Garmin Nuvi 50LM Speaker Replacement: adım 3, 3 resimden 2. Garmin Nuvi 50LM Speaker Replacement: adım 3, 3 resimden 3.

    • Gently pry open the device with the iFixit Plastic Opening Tool found in the iFixit Pro Tech Tool Kit.

    • Be careful not to damage the orange ribbon cable and the motherboard.

    Düzenle

  5. Garmin Nuvi 50LM Speaker Replacement: adım 4, 3 resimden 1. Garmin Nuvi 50LM Speaker Replacement: adım 4, 3 resimden 2. Garmin Nuvi 50LM Speaker Replacement: adım 4, 3 resimden 3.

    • Once the GPS is open, identify the black and blue wires connecting the black speaker to the green motherboard.

    • The black wire is located closest to the speaker.

    • The blue wire is located farthest from the speaker.

    Düzenle

  6. Garmin Nuvi 50LM Speaker Replacement: adım 5, 3 resimden 1. Garmin Nuvi 50LM Speaker Replacement: adım 5, 3 resimden 2. Garmin Nuvi 50LM Speaker Replacement: adım 5, 3 resimden 3.

    • Cut both wires using a pair of wire cutters.

    Düzenle

  7. Garmin Nuvi 50LM Speaker Replacement: adım 6, 2 resimden 1. Garmin Nuvi 50LM Speaker Replacement: adım 6, 2 resimden 2.

    • Solder the wires of the replacement speaker back onto the small silver squares located on the motherboard using the iFixit Soldering Station.

    • Be careful when using the soldering iron, the temperature can reach 600F.

    • Solder the black wire onto the motherboard on the port closest to the speaker and solder the blue wire onto the motherboard on the port farthest from the speaker.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Maurice Thomas

Üyelik tarihi: 10/13/15

661 İtibar

5 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

Sam Houston State, Team 2-7, Blackburne Fall 2015 Sam Houston State, Team 2-7, Blackburne Fall 2015 üyesi

SHSU-BLACKBURNE-F15S2G7

4 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

Where would you get the replacement speakers??

abby dog - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 12

Her zaman: 2,578