Gateway MA6 Laptop Cooling Assembly Replacement

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Giriş

The cooling assembly is made up of a cooling fan and a large piece of copper to help dissipate heat out of the bottom of your laptop. Over time, the fan can wear out and it will need to be replaced.

Neye ihtiyacın var

Adım 1 Cooling Assembly

Gateway MA6 Laptop Cooling Assembly Replacement, Cooling Assembly: adım 1, 2 resimden 1.

Gateway MA6 Laptop Cooling Assembly Replacement, Cooling Assembly: adım 1, 2 resimden 2.

Loosen the seven 6 mm Phillips #0 screws on the back of the case.
Leave all the screws in the back plate and so you don't lose them.

Düzenle

Adım 2

Pull upwards on the top of the back cover to remove it.

Düzenle

Adım 3

Remove the four 9 mm Phillips #0 screws from the cooling assembly.

Düzenle

Adım 4

Gateway MA6 Laptop Cooling Assembly Replacement: adım 4, 3 resimden 3.

Gently and carefully remove the cooling assembly to avoid ripping the wire attaching it to the computer.
Gently flip the cooling fan assembly upside-down on the computer surface.
Carefully grab the wire attached to the computer and pull away from the port.
The cooling fan is now safe for removal.

Düzenle

Adım 5

When reinstalling heat sink and fans clean off the old thermal paste from both the heat sink and the CPU and then add new paste to CPU
If your unfamiliar with applying thermal paste How to Apply Thermal Paste