Ana içeriğe geç

What you need

  1. Gateway MD2614u Fan Replacement, Back Cover: adım 1, 1 resimden 1.
    • Place the laptop so the back cover is facing up.

  2. Gateway MD2614u Fan Replacement: adım 2, 1 resimden 1.
    • Remove the 8 screws from the back cover using the Phillips #00 screwdriver.

  3. Gateway MD2614u Fan Replacement: adım 3, 1 resimden 1.
    • Lift off the cover.

  4. Gateway MD2614u Fan Replacement, Fan: adım 4, 1 resimden 1.
    • Unplug the fan’s power cable, which is a group of black wires attached to a white plastic head on the motherboard.

    • Pull the plastic part of the cable, not the wires, so that the plug does not break.

  5. Gateway MD2614u Fan Replacement: adım 5, 1 resimden 1.
    • Remove the two screws located on opposite sides of the fan with a Phillips #00 screw driver.

  6. Gateway MD2614u Fan Replacement: adım 6, 1 resimden 1.
    • The fan is permanently attached to the silver heat sink next to the RAM.

    • To completely remove the parts, loosen the heat sink’s four screws with a Phillips #00 screw driver.

    • Take out the screws in the numerical order shown on the heat sink.

  7. Gateway MD2614u Fan Replacement: adım 7, 1 resimden 1.
    • Pull the fan and heat sink toward you at a 20 degree angle upward.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Toni Pipes

Üyelik tarihi: 05-10-2010

333 İtibar

7 adet Kılavuz yazıldı

Team

Cal Poly, Team 21-31, Regan Fall 2010 Cal Poly, Team 21-31, Regan Fall 2010 üyesi

CPSU-REGAN-F10S21G31

4 Üyeler

14 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 4,821