Giriş

Access to the Hard Drive Compartment will require some tool work.

Parçalar

Hiçbir parçaya gerek yok.

Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.
  • Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.

Yorum Ekle

Lift up the base cover from the the top with your hands to a 90 degree angle.
  • Lift up the base cover from the the top with your hands to a 90 degree angle.

  • Remove the base cover and place it in a safe and dry place.

Yorum Ekle

Remove the 1/4" Phillip screw located at the top right of the Hard Drive using a Phillips #0 Screwdriver .
  • Remove the 1/4" Phillip screw located at the top right of the Hard Drive using a Phillips #0 Screwdriver .

Yorum Ekle

Remove the Hard Drive component from its compartment. To do so, slide the component downward away from the battery pack. Lift the Hard Drive to a 90 degree angle and out of its slot. Place the Hard Drive in a designated zone.
  • Remove the Hard Drive component from its compartment. To do so, slide the component downward away from the battery pack.

  • Lift the Hard Drive to a 90 degree angle and out of its slot.

  • Place the Hard Drive in a designated zone.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Tim En

Üyelik tarihi: 26-01-2013

479 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 7-24, Regan Spring 2014 Cal Poly, Team 7-24, Regan Spring 2014 üyesi

CPSU-REGAN-S14S7G24

4 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 9

Tüm Zamanlar: 486