Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Gateway SA1 Cooling Fan Replacement

Neye ihtiyacın var

  1. Gateway SA1 Cooling Fan Replacement, Battery: adım 1, 1 resimden 1.
    • Move the latch to the right of the battery to unlock.

  2. Gateway SA1 Cooling Fan Replacement: adım 2, 1 resimden 1.
    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

  3. Gateway SA1 Cooling Fan Replacement, Cooling Fan: adım 3, 2 resimden 1. Gateway SA1 Cooling Fan Replacement, Cooling Fan: adım 3, 2 resimden 2.
    • Unscrew the indicated Philips screw.

    • Screw cannot be completely removed from cover.

  4. Gateway SA1 Cooling Fan Replacement: adım 4, 1 resimden 1.
    • Use the spudger to pry open the cover.

    • There will be three tabs on each side except for the side with the screw.

  5. Gateway SA1 Cooling Fan Replacement: adım 5, 2 resimden 1. Gateway SA1 Cooling Fan Replacement: adım 5, 2 resimden 2.
    • Unscrew the six indicated Philips screws.

    • These screws cannot be completely removed from the cooling fan component.

  6. Gateway SA1 Cooling Fan Replacement: adım 6, 1 resimden 1.
    • Unplug the shown cable attaching the cooling fan to the computer.

  7. Gateway SA1 Cooling Fan Replacement: adım 7, 1 resimden 1.
    • You are now able to remove the cooling fan.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

Diego Carteno

Üyelik tarihi: 04/15/10

258 İtibar

7 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 24-20, Regan Spring 2010 Cal Poly, Team 24-20, Regan Spring 2010 üyesi

CPSU-REGAN-S10S24G20

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 11

Her zaman: 13,427