Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Gateway SA1 Outer Casing Replacement

Neye ihtiyacın var

  1. Gateway SA1 Outer Casing Replacement, Battery: adım 1, 1 resimden 1.
    • Move the latch to the right of the battery to unlock.

  2. Gateway SA1 Outer Casing Replacement: adım 2, 1 resimden 1.
    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

  3. Gateway SA1 Outer Casing Replacement, Disk Drive: adım 3, 1 resimden 1.
    • Unscrew the marked 5.9 mm Philips screw.

  4. Gateway SA1 Outer Casing Replacement: adım 4, 1 resimden 1.
    • Use the spudger to pry out the Disk dive.

  5. Gateway SA1 Outer Casing Replacement: adım 5, 1 resimden 1.
    • The disk drive should easily detach and can now be replaced.

  6. Gateway SA1 Outer Casing Replacement, Outer Casing: adım 6, 1 resimden 1.
    • Remove the twelve 5.9 mm Philips screws from the back cover.

    • Remove one 8.8 mm Philips screw from the back cover.

  7. Gateway SA1 Outer Casing Replacement: adım 7, 3 resimden 1. Gateway SA1 Outer Casing Replacement: adım 7, 3 resimden 2. Gateway SA1 Outer Casing Replacement: adım 7, 3 resimden 3.
    • Unscrew the two 5.9 mm Philips screws located on the the side closest to the battery.

    • Unscrew the three 3.6 mm Philips screws that are within the Disk drive port.

  8. Gateway SA1 Outer Casing Replacement: adım 8, 2 resimden 1. Gateway SA1 Outer Casing Replacement: adım 8, 2 resimden 2.
    • Remove the hinge covers by lifting each with the sharp point of the spudger.

    • Notice that the middle cover has a different shape and is more difficult to remove.

  9. Gateway SA1 Outer Casing Replacement: adım 9, 3 resimden 1. Gateway SA1 Outer Casing Replacement: adım 9, 3 resimden 2. Gateway SA1 Outer Casing Replacement: adım 9, 3 resimden 3.
    • There will be a connection underneath the speaker cover.

    • Remove the speaker cover using the spudger.

  10. Gateway SA1 Outer Casing Replacement: adım 10, 1 resimden 1.
    • Unscrew the two 3.9 mm Philips screws and remove the keyboard.

  11. Gateway SA1 Outer Casing Replacement: adım 11, 3 resimden 1. Gateway SA1 Outer Casing Replacement: adım 11, 3 resimden 2. Gateway SA1 Outer Casing Replacement: adım 11, 3 resimden 3.
    • Carefully lift the keyboard off from the laptop. It is still attached as shown.

    • Using the spudger, detach the connector by pushing two tabs away from the white connector and then gently pulling the connector away.

    • The brown colored component with the tabs does not come out with the connector.

  12. Gateway SA1 Outer Casing Replacement: adım 12, 3 resimden 1. Gateway SA1 Outer Casing Replacement: adım 12, 3 resimden 2. Gateway SA1 Outer Casing Replacement: adım 12, 3 resimden 3.
    • Lift up the black tab and gently pull out the connector.

  13. Gateway SA1 Outer Casing Replacement: adım 13, 2 resimden 1. Gateway SA1 Outer Casing Replacement: adım 13, 2 resimden 2.
    • Unscrew the four marked 5.9 mm Philips screws.

  14. Gateway SA1 Outer Casing Replacement: adım 14, 2 resimden 1. Gateway SA1 Outer Casing Replacement: adım 14, 2 resimden 2.
    • Move the wires out of the fixed space as shown.

  15. Gateway SA1 Outer Casing Replacement: adım 15, 2 resimden 1. Gateway SA1 Outer Casing Replacement: adım 15, 2 resimden 2.
    • Unscrew the five marked 3.8 mm Philips screws.

    • Three screws are located on the right side of the screen.

    • Two screws are located on the left side of the screen.

  16. Gateway SA1 Outer Casing Replacement: adım 16, 1 resimden 1.
    • Remove the screen brackets from the computer's base.

  17. Gateway SA1 Outer Casing Replacement: adım 17, 3 resimden 1. Gateway SA1 Outer Casing Replacement: adım 17, 3 resimden 2. Gateway SA1 Outer Casing Replacement: adım 17, 3 resimden 3.
    • Remove the four 5.9 mm Philips screws as indicated:

    • There is one somewhat hidden screw on the left side under the screen hinge, and one to the right of the (left)speaker, right/top side of the video port on mobo.

    • There are two similarly positioned screws on the right side.

  18. Gateway SA1 Outer Casing Replacement: adım 18, 2 resimden 1. Gateway SA1 Outer Casing Replacement: adım 18, 2 resimden 2.
    • The following steps (18 - 20) explain how to remove the three indicated connections.

    • The order is Blue, Violet, Orange.

    • Lift the white tab up and gently take out the connector.

  19. Gateway SA1 Outer Casing Replacement: adım 19, 1 resimden 1.
    • Use the spudger to pull off the black attachment.

  20. Gateway SA1 Outer Casing Replacement: adım 20, 1 resimden 1.
    • Lift and pull the black tab upward until it becomes unattached.

    • Some force may be required.

  21. Gateway SA1 Outer Casing Replacement: adım 21, 1 resimden 1.
    • Use the spudger to remove the casing as seen in the picture.

    • Some force may be required.

  22. Gateway SA1 Outer Casing Replacement: adım 22, 1 resimden 1.
    • Remove the casing.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

Diego Carteno

Üyelik tarihi: 04/15/10

258 İtibar

7 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 24-20, Regan Spring 2010 Cal Poly, Team 24-20, Regan Spring 2010 üyesi

CPSU-REGAN-S10S24G20

4 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 9

Her zaman: 15,950