Eşyalarını Tamir Et Topluluk Mağaza

GeeksPhone Keon Back Plate Replacement

Giriş

If the back plate of your Keon is damaged or broken, use this guide to replace the back plate.

Neye ihtiyacın var

  1. GeeksPhone Keon Back Plate Replacement, Battery: adım 1, 2 resimden 1. GeeksPhone Keon Back Plate Replacement, Battery: adım 1, 2 resimden 2.

    • Insert the plastic opening tool into the seam between the front of the device and the rear cover.

    • Slide the plastic opening tool from the bottom of the phone to the top.

    • Use the plastic opening tool to free all the clips attached to the phone.

    Düzenle

  2. GeeksPhone Keon Back Plate Replacement: adım 2, 1 resimden 1.

    • Lift the cover away from the phone.

    Düzenle

  3. GeeksPhone Keon Back Plate Replacement: adım 3, 1 resimden 1.

    • Insert the plastic opening tool into the groove between the bottom of the phone and the battery.

    • Lift the battery with the plastic opening tool and finish removing battery by hand.

    Düzenle

  5. GeeksPhone Keon Back Plate Replacement, Back Plate: adım 4, 2 resimden 1. GeeksPhone Keon Back Plate Replacement, Back Plate: adım 4, 2 resimden 2.

    • Remove the two 5mm T4 screws on the sides of the small orange plate.

    Düzenle

  6. GeeksPhone Keon Back Plate Replacement: adım 5, 2 resimden 1. GeeksPhone Keon Back Plate Replacement: adım 5, 2 resimden 2.

    • Gently remove the small orange plate by pulling it down.

    Düzenle

  7. GeeksPhone Keon Back Plate Replacement: adım 6, 1 resimden 1.

    • Remove the following screws securing the back plate to the device:

    • Two silver 2mm T3 screws

    • Five black 3mm T3 screws

    Düzenle

  8. GeeksPhone Keon Back Plate Replacement: adım 7, 3 resimden 1. GeeksPhone Keon Back Plate Replacement: adım 7, 3 resimden 2. GeeksPhone Keon Back Plate Replacement: adım 7, 3 resimden 3.

    • Slightly lift up the bottom corner of the backplate.

    • Release the four clips on both sides by pulling them away from the device.

    Düzenle

  9. GeeksPhone Keon Back Plate Replacement: adım 8, 2 resimden 1. GeeksPhone Keon Back Plate Replacement: adım 8, 2 resimden 2.

    • Lift the backplate away from the device.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Yanni Worthington

Üyelik tarihi: 08/26/15

325 İtibar

3 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

USF Tampa, Team 3-5, Eyestone Fall 2015 USF Tampa, Team 3-5, Eyestone Fall 2015 üyesi

USFT-EYESTONE-F15S3G5

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 125