Eşyalarını Tamir Et Topluluk Mağaza

Generic DualShock 2 Cable Pinout

Giriş

I have this DualShock controller that had broken wires, but I couldn't find how to connect each cable on this board that seems to be a CHS-401, so I went to the trouble of finding how and here it is.

Hope to help somebody.

Neye ihtiyacın var

  1. Generic DualShock 2 Cable Pinout, DualShock 2 Disassembly: adım 1, 2 resimden 1. Generic DualShock 2 Cable Pinout, DualShock 2 Disassembly: adım 1, 2 resimden 2.

    • First, check that the connection port of your controller (whether wireless or not) has all the pins.

    • If you have a wired controller (a controller with a cable that connects directly to your console) try bending it in different directions. This may recconect broken connections within the controller cabel and could be a temporary fix.

    Düzenle

  2. Generic DualShock 2 Cable Pinout: adım 2, 2 resimden 1. Generic DualShock 2 Cable Pinout: adım 2, 2 resimden 2.

    • Flip Over Controller and remove all 6 screws from the bottom of the controller.

    Düzenle

  3. Generic DualShock 2 Cable Pinout: adım 3, 2 resimden 1. Generic DualShock 2 Cable Pinout: adım 3, 2 resimden 2.

    • Once the screws are removed, carefully pry the controller open with your hands.

    • Remove the screw holding the circuit board in place.

    Düzenle

  4. Generic DualShock 2 Cable Pinout: adım 4, 1 resimden 1.

    • Carefully remove the circuit board from the front cover of the controller.

    Düzenle

  6. Generic DualShock 2 Cable Pinout: adım 5, 1 resimden 1.

    • Analyze the rubber pads for any debris that may be getting in the way of the black pads. These make an electrical connection on the pad and may not be contacting properly.

    Düzenle

  7. Generic DualShock 2 Cable Pinout: adım 6, 1 resimden 1.

    • Examine the flexible trigger board itself for any dirt or debris that could get in the rubber button pad's way.

    Düzenle

  8. Generic DualShock 2 Cable Pinout: adım 7, 1 resimden 1.

    • Check the connection of the flexible trigger board to the main circuit board of your controller.

    Düzenle

  9. Generic DualShock 2 Cable Pinout: adım 8, 1 resimden 1.

    • If the previous steps are all covered and you are still facing difficulties in getting your buttons to work, consider replacing the main circuit board or flexible trigger board.

    Düzenle

  10. Generic DualShock 2 Cable Pinout: adım 9, 1 resimden 1.

    • Reverse the disassembly steps until the controller is back to its original state. Plug the controller into the console and test whether the fix worked.

    Düzenle

  11. Generic DualShock 2 Cable Pinout, Cable Color And Order: adım 10, 2 resimden 1. Generic DualShock 2 Cable Pinout, Cable Color And Order: adım 10, 2 resimden 2.

    • Here it is how it should be connected.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Bruno Melo

Üyelik tarihi: 02/07/19

119 İtibar

1 Kılavuz yazıldı

Rozetler: 3

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 66

Son 30 gün: 248

Her zaman: 2,595