Eşyalarını Tamir Et Topluluk Mağaza

Giant Reign 2 Front Wheel Replacement

Giriş

Removing the front wheel of the Giant Reign 2 is a common first step for other repair guides. This guide will clearly show you how to use simple tools to remove the front wheel quickly and safely.

Neye ihtiyacın var

  1. Giant Reign 2 Front Wheel Replacement, Hex Screws: adım 1, 1 resimden 1.

    • Using the 4mm Allen wrench, partially unscrew the 4 (22mm) hex screws on the front of the axle casing to allow the axle to slide freely.

    Düzenle

  2. Giant Reign 2 Front Wheel Replacement, Axle Screw: adım 2, 2 resimden 1. Giant Reign 2 Front Wheel Replacement, Axle Screw: adım 2, 2 resimden 2.

    • Using the 8mm Allen wrench, loosen the axle screw until 1/2 of the axle screw is visible.

    • Push the axle screw to reveal the axle rod on the other side.

    Düzenle

  4. Giant Reign 2 Front Wheel Replacement: adım 3, 1 resimden 1.

    • Using the Allen wrench, finish unscrewing the axle screw and pull it out.

    • Hold the wheel when pulling out the axle rod so that the bike does not fall.

    Düzenle

  5. Giant Reign 2 Front Wheel Replacement, Front Wheel: adım 4, 1 resimden 1.

    • Pull the wheel from the fork.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

9 tane daha katılımcı ile

Andrew Krasts

Üyelik tarihi: 10/05/12

302 İtibar

2 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

Cal Poly, Team 9-14, Amido Fall 2012 Cal Poly, Team 9-14, Amido Fall 2012 üyesi

CPSU-AMIDO-F12S9G14

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 gün: 33

Son 30 gün: 128

Her zaman: 11,371