Ana içeriğe geç

Fix Your Stuff

Right to Repair

Parts & Tools

Giriş

This guide will show how to remove, disassemble, and replace the chainrings from the crank arm on a Giant Talon 29er bicycle. The chainrings should be replaced when the chain starts to skip teeth while riding.

Aletler

Parçalar

  1. Push the chain tensioner towards the front of the bicycle to release the tension on the chain. Unroute the chain from the chainrings. Unroute the chain from the chainrings.
    • Push the chain tensioner towards the front of the bicycle to release the tension on the chain.

    • Unroute the chain from the chainrings.

  2. Remove the 8 mm Hex screw from the crank arm.
    • Remove the 8 mm Hex screw from the crank arm.

  3. Remove the crank arm and chainrings by pulling the crank arm away from the bicycle frame.
    • Remove the crank arm and chainrings by pulling the crank arm away from the bicycle frame.

  4. Remove the four 5 mm Hex screws that mount the crank arm to the chainrings.
    • Remove the four 5 mm Hex screws that mount the crank arm to the chainrings.

  5. Rotate the largest chainring 45 degrees in either direction. Remove the crank arm from the chainrings. Remove the crank arm from the chainrings.
    • Rotate the largest chainring 45 degrees in either direction.

    • Remove the crank arm from the chainrings.

Sonuç

Reassemble your bicycle with the new chainrings by following these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Ben Frisbie

Üyelik tarihi: 22-03-2016

209 İtibar

1 Kılavuz yazıldı

Takım

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 12

Her zaman: 1,316