Eşyalarını Tamir Et Topluluk Mağaza

GoPro Hero Micro USB/MicroSD Card Daughter BoardReplacement

Neye ihtiyacın var

  1. GoPro Hero Micro USB/MicroSD Card Daughter BoardReplacement, Casing: adım 1, 1 resimden 1.

    • Power off your GoPro before beginning disassembly.

    • Unclip the black latch to the camera case and open the case.

    Düzenle

  2. GoPro Hero Micro USB/MicroSD Card Daughter BoardReplacement: adım 2, 1 resimden 1.

    • Gently pry the back open by inserting a metal spudger between the case and back panel.

    Düzenle

  3. GoPro Hero Micro USB/MicroSD Card Daughter BoardReplacement: adım 3, 1 resimden 1.

    • Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.

    Düzenle

  5. GoPro Hero Micro USB/MicroSD Card Daughter BoardReplacement: adım 4, 1 resimden 1.

    • Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.

    Düzenle

  6. GoPro Hero Micro USB/MicroSD Card Daughter BoardReplacement: adım 5, 1 resimden 1.

    • Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.

    • Make sure to keep track of these screws as they are very small.

    Düzenle

  7. GoPro Hero Micro USB/MicroSD Card Daughter BoardReplacement: adım 6, 1 resimden 1.

    • Carefully remove the motherboard and white plastic piece from the case.

    Düzenle

  8. GoPro Hero Micro USB/MicroSD Card Daughter BoardReplacement, Micro USB/MicroSD Card Daughter Board: adım 7, 2 resimden 1. GoPro Hero Micro USB/MicroSD Card Daughter BoardReplacement, Micro USB/MicroSD Card Daughter Board: adım 7, 2 resimden 2.

    • Remove the larger ribbon cable from the daughter board by lifting the black latch and pulling the ribbon cable gently from the socket.

    • Disconnect the smaller ribbon cable leading from the white plastic piece by simply pulling it from the socket.

    Düzenle

  9. GoPro Hero Micro USB/MicroSD Card Daughter BoardReplacement: adım 8, 1 resimden 1.

    • Remove the two screws located on each side of the board with a Phillips screwdriver.

    • The screws go through an L metal bracket that will come off with the screws.

    Düzenle

  10. GoPro Hero Micro USB/MicroSD Card Daughter BoardReplacement: adım 9, 1 resimden 1.

    • Separate the daughter board from the white plastic piece.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

River Drake

Üyelik tarihi: 04/02/15

1.023 İtibar

5 adet Kılavuz yazıldı

Rozetler: 15

+12 tane daha rozet

Ekip

Cal Poly, Team 12-2, Lancaster Spring 2015 Cal Poly, Team 12-2, Lancaster Spring 2015 üyesi

CPSU-LANCASTER-S15S12G2

4 Üyeler

18 adet Kılavuz yazıldı

4 Yorum

Wo kann ich ein daughterboard kaufen habt ihr da was für mich?

Lukas Blohm - Yanıt

bravo! è scritto molto bene ed è stato utile. ma dove trovo il ricambio? non ci riesco!!!

michele - Yanıt

Terrific guide. Does anyone know where to buy the “daughter board”?

fedebossert - Yanıt

ide. Does anyone know where to buy the “daughter board”?

fedebossert - 05/27/20

<a href="https://www.w3schools.com/">Visit W3Schools.com!</a>

pavan kalyan - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 16

Her zaman: 4,767