Ana içeriğe geç

GoPro Karma Landing Gear Replacement

Neye ihtiyacın var

  1. GoPro Karma Landing Gear Replacement, Battery: adım 1, 1 resimden 1.
    • Hook your fingers on the tab and pull out the battery.

  2. GoPro Karma Landing Gear Replacement, Stabilizer: adım 2, 3 resimden 1. GoPro Karma Landing Gear Replacement, Stabilizer: adım 2, 3 resimden 2. GoPro Karma Landing Gear Replacement, Stabilizer: adım 2, 3 resimden 3.
    • Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.

    • Place the GoPro Karma on a stable surface with the legs folded in and the stabilizer facing towards yourself.

  3. GoPro Karma Landing Gear Replacement: adım 3, 1 resimden 1.
    • Remove the stabilizer by pulling the entire stabilizer out of the drone body.

  4. GoPro Karma Landing Gear Replacement, Landing Gear: adım 4, 1 resimden 1.
    • Flip the drone upside down with the landing gear out.

    • Remove the four 1.2 cm long hex screws with a Hex 2.0 screwdriver in the four corners of the landing gear

  5. GoPro Karma Landing Gear Replacement: adım 5, 1 resimden 1.
    • Push with your thumb and pull up with your fingers to remove the landing gear.

    • Caution: The landing gear is connected by a thin cable so do not pull too far away.

  6. GoPro Karma Landing Gear Replacement: adım 6, 2 resimden 1. GoPro Karma Landing Gear Replacement: adım 6, 2 resimden 2.
    • Flip over the landing gear and locate the cable connector.

    • Use your thumbnail to disconnect the cable and free the landing gear.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jay Ingram

Üyelik tarihi: 04/19/18

334 İtibar

3 adet Kılavuz yazıldı

Ekip

Cal Poly, Team S25-G14, Maness Spring 2018 Cal Poly, Team S25-G14, Maness Spring 2018 üyesi

CPSU-MANESS-S18S25G14

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 5

Her zaman: 588