Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.
Giriş
Prerequisite guide only! This guide is part of an another procedure and is not meant to be used alone.
Neye ihtiyacın var
-
-
Remove the five Phillips screws securing the wireless charging coil:
-
Two 1.9 mm screws
-
Two 4.2 mm screws
-
One 4.3 mm screw
-
Remove the wireless charging coil.
-
-
-
-
Use the point of a spudger to pry up and disconnect the battery connector from its socket near the right edge of the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.