Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

This guide will outline how to replace a cracked, shattered, or faulty screen on a Google Pixel C.

  1. Ensure that the device is completely powered down before beginning to take it apart
    • Ensure that the device is completely powered down before beginning to take it apart

    • Use a heat gun to melt the adhesive that holds the screen to the device

    • Move the heat gun around the edge of the screen for approximately 1 minute, or until the screen can be lifted off in the next step.

    • Make sure not to heat the screen for too long because too much can damage other components inside the tablet.

  2. Use a suction cup to assist in lifting the screen while prying around its edges with a plastic spudger. If necessary use a metal spudger to pry the screen up, taking care not to scratch the device.
    • Use a suction cup to assist in lifting the screen while prying around its edges with a plastic spudger.

    • If necessary use a metal spudger to pry the screen up, taking care not to scratch the device.

    • Be careful not to pull the screen too far off. It will still be attached to the device by a cable for the front facing camera and the wide display data cable.

    • Reattaching the screen will require adhesive to ensure that it stays in place.

  3. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  4. Detach the cables for the camera by lifting the small flap using the tip of your fingernail or a spudger. Gently pull the ribbon cable out. Detach the cables for the camera by lifting the small flap using the tip of your fingernail or a spudger. Gently pull the ribbon cable out.
    • Detach the cables for the camera by lifting the small flap using the tip of your fingernail or a spudger. Gently pull the ribbon cable out.

  5. Follow the same removal procedure to detach the wide gold cable. When reattaching cables, it is helpful to use tweezers to slide the cable in before securing it down with the flap.
    • Follow the same removal procedure to detach the wide gold cable.

    • When reattaching cables, it is helpful to use tweezers to slide the cable in before securing it down with the flap.

    • This device is missing a battery, so the device that you are working on may appear slightly different inside.

Sonuç

To reassemble your device, follow these instructions in reverse order.

8 farklı kişi bu kılavuzu tamamladı.

Deborah Iwakiri

Üyelik tarihi: 25-04-2017

477 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team S21-G4, Livingston Spring 2017 Cal Poly, Team S21-G4, Livingston Spring 2017 üyesi

CPSU-LIVINGSTON-S17S21G4

4 Üyeler

11 adet Kılavuz yazıldı

23 Yorum

Where can a replacement screen be located?

Ronnie Williams - Yanıt

Where can i buy a spare screen for this tablet?

Luigi Abbinante - Yanıt

Yes, I have to buy the screen too, but where??

Кирилл Кнышев - Yanıt

All very nice but unfortunately useless without knowing where to get the parts :(

Lorenzo Braschi - Yanıt

Ciao Lorenzo, sei poi riuscito a trovare il ricambio?

Luigi Abbinante -

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 9

Son 7 gün: 73

Son 30 gün: 238

Her zaman: 10,671