Eşyalarını Tamir Et Topluluk Mağaza

GoolRC X1 RC Fan Blades Replacement

Giriş

Drone fan-blades can get damaged and need replacement over time. The damage is caused due to hitting a wall or different objects in the environment while flying. This guide helps you change the fan-blades for the GoolRC X1 RC Drone.

Neye ihtiyacın var

  1. GoolRC X1 RC Fan Blades Replacement, Fan Blades: adım 1, 1 resimden 1.

    • Unscrew the different sets of fan blades by rotating the T5 screws to the left.

    Düzenle

  2. GoolRC X1 RC Fan Blades Replacement: adım 2, 2 resimden 1. GoolRC X1 RC Fan Blades Replacement: adım 2, 2 resimden 2.

    • Unscrew and remove the two T5 screws from the bottom of the set by rotating to the left.

    Düzenle

  4. GoolRC X1 RC Fan Blades Replacement: adım 3, 2 resimden 1. GoolRC X1 RC Fan Blades Replacement: adım 3, 2 resimden 2.

    • Remove the plastic bracket by lifting it.

    Düzenle

  5. GoolRC X1 RC Fan Blades Replacement: adım 4, 2 resimden 1. GoolRC X1 RC Fan Blades Replacement: adım 4, 2 resimden 2.

    • Take the damaged blades off.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order

Yazar

1 tane daha katılımcı ile

Simrat Brar

Üyelik tarihi: 01/13/22

109 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

York University, Team 2-5, O'Regan Winter 2022 York University, Team 2-5, O'Regan Winter 2022 üyesi

YORK-O'REGAN-W22S2G5

1 Üye

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 141