Ana içeriğe geç

Graco Literider Classic Connect Seat Replacement

Neye ihtiyacın var

  1. Graco Literider Classic Connect Seat Replacement, Seat: adım 1, 2 resimden 1. Graco Literider Classic Connect Seat Replacement, Seat: adım 1, 2 resimden 2.
    • Flip the stroller over so the back of the seat points upward.

    • Locate the twelve 12 mm Phillips screws holding the fabric to the frame of the stroller. Six are found along the back of the seat, and the other six are along the bottom of the seat.

  2. Graco Literider Classic Connect Seat Replacement: adım 2, 2 resimden 1. Graco Literider Classic Connect Seat Replacement: adım 2, 2 resimden 2.
    • Using a Phillips #1 screwdriver, remove the twelve 12 mm screws and set them aside.

  3. Graco Literider Classic Connect Seat Replacement: adım 3, 2 resimden 1. Graco Literider Classic Connect Seat Replacement: adım 3, 2 resimden 2.
    • Locate the two buttons holding the fabric basket frame on either side of the stroller.

    • Unbutton the two buttons.

  4. Graco Literider Classic Connect Seat Replacement: adım 4, 2 resimden 1. Graco Literider Classic Connect Seat Replacement: adım 4, 2 resimden 2.
    • Locate the three velcro straps holding the seat to the canopy.

    • Undo the three straps.

  5. Graco Literider Classic Connect Seat Replacement: adım 5, 1 resimden 1.
    • Remove the seat from the frame.

    • When replacing the seat on the frame, some additional force may be required to insert the screws into their proper places.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Tyler Laird

Üyelik tarihi: 09/29/15

540 İtibar

3 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 11-4, Forte Fall 2015 Cal Poly, Team 11-4, Forte Fall 2015 üyesi

CPSU-FORTE-F15S11G4

5 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 12

Son 30 gün: 25

Her zaman: 1,074