Ana içeriğe geç

HKC P776A Battery Replacement

Neye ihtiyacın var

  1. HKC P776A Battery Replacement, Separating Digitizer and Case: adım 1, 1 resimden 1.
    • Insert the plastic opening tool between the digitizer and the case.

    • Place the spudger in the gap created by the plastic opening tool to assist in separation.

  2. HKC P776A Battery Replacement: adım 2, 2 resimden 1. HKC P776A Battery Replacement: adım 2, 2 resimden 2.
    • Slide the spudger along the perimeter of the device to fully separate the two pieces.

  3. HKC P776A Battery Replacement, Battery: adım 3, 1 resimden 1.
    • Insert the plastic opening tool between the battery and case.

    • Apply leverage to break the glue that is attaching the battery to the case.

  4. HKC P776A Battery Replacement: adım 4, 1 resimden 1.
    • Continue breaking the glue along the perimeter of the battery until the battery can be removed.

    • Breaking all the glue between the battery and case may take a long time.

  5. HKC P776A Battery Replacement: adım 5, 2 resimden 1. HKC P776A Battery Replacement: adım 5, 2 resimden 2.
    • Using the soldering iron, heat up the solder that is attaching the battery to the motheboard.

    • The heat from the soldering iron may cause personal injury or damage the internal components of the tablet.

  6. HKC P776A Battery Replacement: adım 6, 1 resimden 1.
    • Suck up the leftover solder using the desoldering pump.

    • Remove the battery from the motherboard.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Ryan Gornati

Üyelik tarihi: 01/22/15

409 İtibar

4 adet Kılavuz yazıldı

Ekip

USF Tampa, Team 7-6, Remmell Winter 2015 USF Tampa, Team 7-6, Remmell Winter 2015 üyesi

USFT-REMMELL-W15S7G6

3 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 632