Eşyalarını Tamir Et Topluluk Mağaza

HKC P776A Digitizer Replacement

Neye ihtiyacın var

  1. HKC P776A Digitizer Replacement, Separating Digitizer and Case: adım 1, 1 resimden 1.

    • Insert the plastic opening tool between the digitizer and the case.

    • Place the spudger in the gap created by the plastic opening tool to assist in separation.

    Düzenle

  2. HKC P776A Digitizer Replacement: adım 2, 2 resimden 1. HKC P776A Digitizer Replacement: adım 2, 2 resimden 2.

    • Slide the spudger along the perimeter of the device to fully separate the two pieces.

    Düzenle

  4. HKC P776A Digitizer Replacement, Separating the Screen and the Digitizer: adım 3, 2 resimden 1. HKC P776A Digitizer Replacement, Separating the Screen and the Digitizer: adım 3, 2 resimden 2.

    • Use your fingers to pop the screen out from the digitizer.

    Düzenle

  5. HKC P776A Digitizer Replacement, Removing the Cable from the Motherboard: adım 4, 2 resimden 1. HKC P776A Digitizer Replacement, Removing the Cable from the Motherboard: adım 4, 2 resimden 2.

    • Use the tip of the spudger to release the latches on the motherboard.

    Düzenle

  6. HKC P776A Digitizer Replacement: adım 5, 1 resimden 1.

    • Remove the cable from the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Spencer Pheasant

Üyelik tarihi: 01/20/15

301 İtibar

3 adet Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

USF Tampa, Team 7-6, Remmell Winter 2015 USF Tampa, Team 7-6, Remmell Winter 2015 üyesi

USFT-REMMELL-W15S7G6

3 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 4

Her zaman: 132