Ana içeriğe geç

HP 14-ac151nr DC Power Jack Replacement

Neye ihtiyacın var

  1. HP 14-ac151nr DC Power Jack Replacement, Backplate: adım 1, 1 resimden 1.
    • Remove battery by pushing the two buttons inward.

  2. HP 14-ac151nr DC Power Jack Replacement: adım 2, 1 resimden 1.
    • Remove the two rubber feet next to the battery.

  3. HP 14-ac151nr DC Power Jack Replacement: adım 3, 1 resimden 1.
    • Remove all 14 Phillips head #0 screws.

  4. HP 14-ac151nr DC Power Jack Replacement: adım 4, 1 resimden 1.
    • Use a plastic opener tool to pry off the black backplate.

  5. HP 14-ac151nr DC Power Jack Replacement, DC Power Jack: adım 5, 2 resimden 1. HP 14-ac151nr DC Power Jack Replacement, DC Power Jack: adım 5, 2 resimden 2.
    • Remove the black tape near the power jack.

    • Remove the screws connecting monitor to the bottom of the computer.

  6. HP 14-ac151nr DC Power Jack Replacement: adım 6, 1 resimden 1.
    • Position the metal fittings attached to the monitor out of the way.

    • The monitor is still attached by wires — be careful not to pull on it too hard.

  7. HP 14-ac151nr DC Power Jack Replacement: adım 7, 3 resimden 1. HP 14-ac151nr DC Power Jack Replacement: adım 7, 3 resimden 2. HP 14-ac151nr DC Power Jack Replacement: adım 7, 3 resimden 3.
    • Disconnect the power jack from the motherboard.

    • Remove the power jack by lifting it up.

    • An opener tool may make this easier.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Antonio Leonti

Üyelik tarihi: 10/26/18

410 İtibar

3 adet Kılavuz yazıldı

Ekip

UMass Dartmouth, Team S1-G7, Simcock Fall 2018 UMass Dartmouth, Team S1-G7, Simcock Fall 2018 üyesi

UMASSD-SIMCOCK-F18S1G7

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 5

Son 30 gün: 10

Her zaman: 428