Ana içeriğe geç

HP 15-ay103dx Back Panel Replacement

Neye ihtiyacın var

  1. HP 15-ay103dx Back Panel Replacement, Battery: adım 1, 1 resimden 1.
    • Slide the two battery lock latches on the back of the device to the “unlock” position.

  2. HP 15-ay103dx Back Panel Replacement: adım 2, 1 resimden 1.
    • Lift the battery upward to remove it from the device.

  3. HP 15-ay103dx Back Panel Replacement, Back Panel: adım 3, 1 resimden 1.
    • Using the PH1 phillips-head screwdriver, remove all the 5/16 in. screws from the back of the device.

    • There should be 10 in total, be sure to keep them together!

  4. HP 15-ay103dx Back Panel Replacement: adım 4, 1 resimden 1.
    • Locate the optical disc drive and remove it from the device by sliding it straight of the device.

  5. HP 15-ay103dx Back Panel Replacement: adım 5, 2 resimden 1. HP 15-ay103dx Back Panel Replacement: adım 5, 2 resimden 2.
    • Covering the hinges of the device are rubber bumpers secured to the device using adhesive. Remove them carefully.

    • Place the adhesive side up as you will need to place them back after your replacement is complete.

  6. HP 15-ay103dx Back Panel Replacement: adım 6, 2 resimden 1. HP 15-ay103dx Back Panel Replacement: adım 6, 2 resimden 2.
    • In the same spot you’ve just removed the bumpers from, you will find two 5/16 in. screws. Using the same Phillips-head screwdriver used in step 2, remove the screws

    • Be sure to keep the screws together!

  7. HP 15-ay103dx Back Panel Replacement: adım 7, 1 resimden 1.
    • Carefully remove the back panel from the device.

    • If you are unable to do this with your hands, you can use a thin prying tool of your choice to make it easier!

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 9

Her zaman: 1,510