Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Parçalar

Hiçbir parça belirtilmedi.

  1. Use phillips screwdriver flathead 2.5 mm to open the cover.
    • Use phillips screwdriver flathead 2.5 mm to open the cover.

  2. Use the Metal spudger set to gently open the front cover
    • Use the Metal spudger set to gently open the front cover

  3. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Kit Satın Al

    Enough RAM
    For All The Tabs

    Kit Satın Al
  4. Use phillips screwdriver JIS J00 to open the screws holding the motherboard.
    • Use phillips screwdriver JIS J00 to open the screws holding the motherboard.

  5. Pull out the wires connected to the motherboard, so that it is removable. Then, take off the motherboard. Pull out the wires connected to the motherboard, so that it is removable. Then, take off the motherboard. Pull out the wires connected to the motherboard, so that it is removable. Then, take off the motherboard.
    • Pull out the wires connected to the motherboard, so that it is removable. Then, take off the motherboard.

  6. Use the spudger set to gently take out the RAM and then replace it. Make sure to replace the RAM from the other side, underneeth the labtop.
    • Use the spudger set to gently take out the RAM and then replace it.

    • Make sure to replace the RAM from the other side, underneeth the labtop.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 21

Her zaman: 130