Ana içeriğe geç

HP 7 Plus 1302 Speaker Replacement

Neye ihtiyacın var

  1. HP 7 Plus 1302 Speaker Replacement, Back Cover: adım 1, 1 resimden 1.
    • Using the T5 Torx Screwdriver, remove the T5x3mm screws located in all 4 corners.

    • Device should be turned off and unplugged before starting the replacements.

  2. HP 7 Plus 1302 Speaker Replacement: adım 2, 2 resimden 1. HP 7 Plus 1302 Speaker Replacement: adım 2, 2 resimden 2.
    • Use the plastic opening tool to push in between the front and the back of the tablet.

    • Slide the plastic opening tool around all 4 sides of the tablet to separate the back cover.

    • Be careful when you are trying to remove the back as it can damage the screen if you force it too much.

  3. HP 7 Plus 1302 Speaker Replacement: adım 3, 2 resimden 1. HP 7 Plus 1302 Speaker Replacement: adım 3, 2 resimden 2.
    • Continue sliding the plastic opening tool around the tablet until all 4 sides are separated from each other.

    • Remove the back cover.

  4. HP 7 Plus 1302 Speaker Replacement, Speaker: adım 4, 1 resimden 1.
    • Use tweezers to push out the speaker connector.

  5. HP 7 Plus 1302 Speaker Replacement: adım 5, 1 resimden 1.
    • A thin strip of double sided tape secure sthe speaker to the device and is located beneath the speaker.

    • Use the flat end of spudger to pry out the speaker

    • Be careful when working the speaker away from the double-sided tape. Excessive force may damage the component.

  6. HP 7 Plus 1302 Speaker Replacement: adım 6, 1 resimden 1.
    • Lift the speaker away from the device and replace it with the new one.

Sonuç

To reassemble your device, follow these instructions in reverse order.

junlin16

Üyelik tarihi: 07/07/15

101 İtibar

1 Kılavuz yazıldı

Ekip

IUPUI, Team 1-2, Renguette SU 2015 IUPUI, Team 1-2, Renguette SU 2015 üyesi

IUPUI-RENGUETTE-SU15S1G2

5 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 5

Her zaman: 203