Giriş

In this guide you will be shown how to remove the trackpad from the HP Chromebook CB2L.

  1. Flip the Chromebook over, and starting at the top right or left hand corner of the large blue piece, use the plastic opening tool to remove it. Remove six 4.77mm screws using the Phillips #1 screwdriver. This part has fragile plastic connectors on it.  Do not damage them.
    • Flip the Chromebook over, and starting at the top right or left hand corner of the large blue piece, use the plastic opening tool to remove it.

    • Remove six 4.77mm screws using the Phillips #1 screwdriver.

    • This part has fragile plastic connectors on it. Do not damage them.

  2. Starting at either the top left or right hand corner of the exposed metal piece, use the blue plastic opening tool to remove the back panel. Starting at either the top left or right hand corner of the exposed metal piece, use the blue plastic opening tool to remove the back panel. Starting at either the top left or right hand corner of the exposed metal piece, use the blue plastic opening tool to remove the back panel.
    • Starting at either the top left or right hand corner of the exposed metal piece, use the blue plastic opening tool to remove the back panel.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Remove four 3.42mm screws using the Phillips #1 screwdriver. Disconnect the battery from the motherboard.
    • Remove four 3.42mm screws using the Phillips #1 screwdriver.

    • Disconnect the battery from the motherboard.

    • Remove the battery.

  5. Remove four 2.57mm screws using the Phillips #1 screwdriver.
    • Remove four 2.57mm screws using the Phillips #1 screwdriver.

    • Remove single 2.43mm screw using the Phillips #1 screwdriver.

  6. Remove the metal piece along the bottom of the trackpad. Use the plastic opening tool to carefully flip the black piece on the ribbon cable holder then remove the ribbon cable. Push the trackpad out from the keyboard side.
    • Remove the metal piece along the bottom of the trackpad.

    • Use the plastic opening tool to carefully flip the black piece on the ribbon cable holder then remove the ribbon cable.

    • Push the trackpad out from the keyboard side.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nathan Petrie

Üyelik tarihi: 31-10-2018

277 İtibar

2 adet Kılavuz yazıldı

Takım

IUPUI, Team S1-G4, Harley Fall 2018 IUPUI, Team S1-G4, Harley Fall 2018 üyesi

IUPUI-HARLEY-F18S1G4

3 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 2

Her zaman: 41