Eşyalarını Tamir Et Topluluk Mağaza

HP Color LaserJet Pro MFP M277dw Power Module Replacement

Giriş

This guide will help you replace your power module in a HP Color Laser Jet Pro MFP M277dw.

Neye ihtiyacın var

  1. HP Color LaserJet Pro MFP M277dw Power Module Replacement, Power Module: adım 1, 3 resimden 1. HP Color LaserJet Pro MFP M277dw Power Module Replacement, Power Module: adım 1, 3 resimden 2. HP Color LaserJet Pro MFP M277dw Power Module Replacement, Power Module: adım 1, 3 resimden 3.

    • Open and lower the back panel by pulling it down.

    • Remove one Phillips #2 10 mm screw.

    Düzenle

  2. HP Color LaserJet Pro MFP M277dw Power Module Replacement: adım 2, 3 resimden 1. HP Color LaserJet Pro MFP M277dw Power Module Replacement: adım 2, 3 resimden 2. HP Color LaserJet Pro MFP M277dw Power Module Replacement: adım 2, 3 resimden 3.

    • Use the plastic opening tool to remove the right side panel of the printer.

    • Flipping the printer on its side, with the right side facing up, will make it easier to remove.

    Düzenle

  4. HP Color LaserJet Pro MFP M277dw Power Module Replacement: adım 3, 3 resimden 1. HP Color LaserJet Pro MFP M277dw Power Module Replacement: adım 3, 3 resimden 2. HP Color LaserJet Pro MFP M277dw Power Module Replacement: adım 3, 3 resimden 3.

    • Remove two Phillips #2 12mm screws.

    • Remove four different pin connectors that attach to the power module located at the bottom.

    • Removing the white connector is made easier with assistance of a spudger/flat tip that loosens the clamp.

    Düzenle

  5. HP Color LaserJet Pro MFP M277dw Power Module Replacement: adım 4, 2 resimden 1. HP Color LaserJet Pro MFP M277dw Power Module Replacement: adım 4, 2 resimden 2.

    • Remove two Phillips #2 10mm from the left (front) and right (back) side that attach the power module to the printer.

    Düzenle

  6. HP Color LaserJet Pro MFP M277dw Power Module Replacement: adım 5, 3 resimden 1. HP Color LaserJet Pro MFP M277dw Power Module Replacement: adım 5, 3 resimden 2. HP Color LaserJet Pro MFP M277dw Power Module Replacement: adım 5, 3 resimden 3.

    • Slowly lift the power module from the printer using both hands.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Lyndon Fresnido

Üyelik tarihi: 10/08/18

184 İtibar

1 Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

Cal Poly, Team S4-G2, White Fall 2018 Cal Poly, Team S4-G2, White Fall 2018 üyesi

CPSU-WHITE-F18S4G2

3 Üyeler

10 adet Kılavuz yazıldı

2 Yorum

Hello, wäre can i buy the power supply? Thank you

Jakob Hetzendorfer - Yanıt

Thanks a lot - also works for model M281fdw

patrik maurer - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 10

Son 30 gün: 62

Her zaman: 4,265